ECHLOR PPE Electrolyzer
ECHLOR PPE System provide incomparable biofouling control
EICS provide incomparable biofouling control in power plants, cooling towers, liquefied natural gas (LNG) terminals and desalination facilities, as well as coastal installations using seawater for cooling or other process needs all over the world
System Overview
Simple and straightforward electrolytic process, combining two common consumables (seawater and electricity) to economically and safely generate critical sodium hypochlorite solution
Standard ECHLOR PPE systems range in capacity starting at 480 kg/day to 21,600 kg/day (1058 lb/day to 47,620 lb/day) per train with higher capacities achieved by adding trains.
ECHLOR PPE systems are designed and assembled for continuous and unattended operation requiring minimal monitoring. Typical transport and handling limitations have also been considered to minimize customer logistics.
- Preferred electrochlorination system for biofouling control
- Based on 90 years of electrochemical experience
- Effective and reliable treatment in hazardous marine/corrosive environments
- Easy operation and minimal maintenance
Parallel Plate Electrolyzer
Pressurized seawater, which can be supplied by EICS, is delivered to the Electrochlorination system where it is strained to remove suspended solids larger than
0.5 mm. The seawater passes through a flow control assembly, which may include a flow control valve and a flow transmitter with local indication and low flow
shut-down protection. The seawater then passes through the electrolyzer cells and exits as sodium hypochlorite solution with the byproduct, hydrogen gas. This two-phase solution is piped to a tank or hydrocyclone where hydrogen gas is removed from the solution. The hydrogen is typically diluted with air using a set of redundant blowers to a safe level (typically less than 1% by volume which is 25% of the explosive limit). Finally, the sodium hypochlorite solution is injected at the required continuous and/or shock-dose rates.
Our systems are certified
We are able to provide options for the certification as follows:
EICS is proudly
Made with passion
Our products are proudly made in Singapore and uses only reputable component renowned for their reliability. Our products are made to suit our customer requirements and is guaranteed to work and last!
EICS TECHNOLOGY USES MAGNETO SPECIAL ANODES FOR QUALITY
We are proud to be using Evoqua’s MAGNETO Anode – The patent holder of the titanium anode. A proud supplier of high-quality titanium anodes and electrochemical cells for a variety of applications.
// Drop us a line! We are here to answer your questions 24/7